Kit Keg Tap
 |
 2 Faucet Draft Beer Brass Tower Kegerator Tap Keg Kit  US $339.00
|
 2 Faucet Draft Beer Steel Tower Kegerator Keg Tap Kit US $319.00
|
 2 Faucet Keg Tap Draft Beer Kegerator Conversion Kit US $289.00
|
 2 Tap Kegerator Kit for Draft Beer Keg Fridge CO2 Tank US $289.00
|
 European Draft Beer Keg Tap Brass Tower Kegerator Kit US $259.00
|
 Kegco Ultimate Tower 2 Tap Kegerator Ball Lock Keg Kit US $254.95
|
 Kegco Ultimate 2 Keg Tap Draft Kegerator Kit EBUCK2 5T US $274.95
|
 Stainless Steel Faucet Draft Beer Kegerator Keg Tap Kit US $249.00
|
 DLX European Tap Draft Beer Keg Faucet Kegerator Kit US $249.00
|
 Kegerator Beer Keg Tap Kit with CO2 tank US $200.00
|
 European Keg Tap Draft Beer Single Faucet Kegerator Kit US $199.00
|
 Draft Beer Keg Tap Chrome Faucet Tower Kegerator Kit US $199.00
|
 Kegco 2 Tap Kegerator Kit Keg Beer 2SCK 5T w 5 lb Tank US $194.95
|
 Kegco Ultimate 2 Keg Tap Draft Kegerator Kit No Tank US $194.95
|
 Kegco Tower Beer Keg Conversion Kit Tap STCK T7425T US $189.95
|
 New Draft Beer Kegerator Faucet Conversion Keg Tap Kit US $169.00
|
 Kegco Ultimate 2 Keg Tap Beer Kegerator Kit Ball Lock US $164.95
|
 Kegco Deluxe Two Keg Door Mount Kegerator Kit Beer Tap US $164.95
|
 Kegco 2 Tap Kegerator Conversion Kit Keg Beer 2SCK NT US $159.95
|
 Kegco Deluxe Kegerator Kit Keg Draft Beer Tap DCK 5T US $159.95
|
 Kegco One Keg Homebrew Kegerator Kit Ball Lock Keg Tap US $154.95
|
 Beer Machine BrewMaster Home Brew Kit Keg Tap US $134.95
|
 Kegco Ultimate Home Brew Keg Tap Pin Lock Kit No Tank US $124.95
|
 Kegco Ultimate Home Brew Kegerator Keg Tap Kit No Tank US $119.95
|
 Beer Machine 2000 Home Brew Kit Keg Tap US $85.00
|
 Tap Cleaning Kit Tap Cleaner Keg Cleaner Kegerator Cleaner Kit US $62.95
|
 Sankey kegerator add a tap kit for US kegs US $59.95
|
 Deluxe Beer Line Kegerator Cleaning Kit Keg Tap Draft US $47.95
|
 Draft Beer Tower Rebuild Kit Tap Keg Faucet Shank Hose US $44.95
|
 Kegco Draft Beer Line Kegerator Cleaning Kit Keg Tap US $40.50
|
 Kegco Basic Kegerator Conversion Kit Keg Tap BCK NT US $37.95
|
 Draft Beer Faucet Shank Tap Kegerator Keg Kit US $29.95
|
 Johnson Grabber Beer Tap Pump Kit Party Keg Kegger US $24.95
|
 Stainless Draft Beer Shank 3 1 8 Kegerator Tap Kit Keg US $20.95
|
 Economy Beer Line Kegerator Cleaning Kit Keg Draft Taps US $19.95
|
 New Keg Tap Direct Draw Cleaning Kit Draft Draught Beer US $17.99
|
 Kegco Standard Party Beer Dispener Keg Tap Kit US $3.25
|
Build Your Own Kegerator
There are some things a real beer lover should not have to do without and one of the most significant ones is to have a cold beer when the mood strikes. There are 2 ways to make sure that you never need to suffer this fate. One way is to keep going to the store and buying case after case of beer or you could buckle down and decide to make your very own kegerator. A full-size keg holds about 165 beers which may save you many visits to the store to replinish your diminishing beer stock.
Purchasing a kegerator is a practical choice for some people but other folks prefer to save some money and have a convenient kegerator they can customise and say they built with their own hands. You might even be stunned to hear that it's not so hard to do and will only run you around $200. If taking on a do it yourself project interest you then the article below has you covered from A-Z! Explore the directions we've outlined for you here to help decide your favorite approach.
Things you need:
- Refrigerator
- Kegerator conversion kit
- CO2 cylinder
- One and three eighth inch hole saw
- seven eighth inch hole saw
- Hacksaw
- A keg of beer
Now provided that you have all of the above items, it is time to begin the setup process. The first point of order is to figure out where you will install the tap. Be sure to put it low enough so that freezer door can open without hitting the handle of the tap. Drill the 0.25" pilot hole through the whole door. Next, make a hole with a one and three eighth hole saw just through the outer part of the door and the quarter" hole saw through the inside part of the door. Once you have found out the thickness of the door, saw the PVC pipe to the chosen length and insert it between the holes.
Next install the tap by attaching the tap to the shank and slowly fasten with a wrench. Place your shank into the PVC pipe and tighten with the shank nut. Now place the loose clamp on the hose before attaching to the shank. Push the beer hose into the other side of the shank and fasten the clamp. Insert a rubber washer into the end of the beer hose and fasten the nut onto the top part of the keg coupler. The drip tray should be placed about one foot below the tap by placing screws into the door for it to hang.
At about that point you will need to add a clamp on the gas hose and fasten it on the thin end of the coupler and clamp down. Put another clamp on the other end and fasten that to the thin end of your CO2 regulator and tighten. Take the regulator and attach the end with a nut on it to the CO2 cylinder and fasten. Be sure to not make it too tight because you will want to remove it for re-filling the canister. Insert your coupler into the keg, handle pointing up and rotate the coupler till it stops. Pull out the handle and push down hard on it till you hear it pop below the hatch. Now open the regulator valve by pointing it along the hose. Open the valve on top of the tank and turn the regulator until it reaches 10 psi. The 1st couple of glasses normally has too much froth but the 3rd will be nearer to what you are looking for. By tweeking the regulator a bit, you can attain the specified quantity of gas you need with each beer.
Jeff was raised in Houston and enjoys informing people about newly established Houston bars and various nightlife activities. He is also the owner of web site that lists all of the best happy hours in Houston.
Adding a sanke tap to your homebrew kegging kit!
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.